【Product Information】

Neutral, One-component. To be cured at room temperature.

【Characteristics】

Excellent water resistance and gas tightness

Wide application temperature range: -60℃~200℃

Chemical reagents and oil resistance

Good adhesions with different materials and non-corrosive to metals while being cured

【Application】

It can be used in special condition with requirement of fuel resistant or non-polar solvent as adhering sealant, such as narrow space, irregular trough, seam, ditch, the other pats that are difficult to be fixed. Integral sealing or caulking for oil tank of aircrafts.

【How To Use】

1.Surface preparation:Clean the surface of application parts with ethanol or acetone for removing dirt, oil an greasy.
2.Application: Coat component on the surface of application parts. Cure for 24 hours at room temperature. Strength will reach to the highest after one week.

【Attention】

1.If the component is not used up,keep it sealed well for avoiding being cured.
2.It is irritate to eyes.Please protect your eyes carefully while handling.If it gets into your eyes, flush with water immediately and then go to consult a doctor.

【Package】

PE drums.

【Storage】

Keep it in cool and dry place.Validity is 6 months.

【Transportation】

Transport it as non-dangerous cargo.